Showing posts with label ceramic and pottery. Show all posts
Showing posts with label ceramic and pottery. Show all posts

Sunday, April 8, 2018

Succulent Pots

I have been busy making some new items including succulent pots and coasters.  The pottery pots are hand built with a organic feel, with lots of curves and crevices in free form designs. I wanted them to look as they were part of the desert part of the earth, holding a tiny treasure of a hardy succulent or cactus. Made of clay, shaped, dried, fired, glazed inside and out and fired again before becoming a one of a kind pot. They are glazed with a food safe glaze and should be hand washed only. Available in several colors, there are holes at the bottom for drainage. Available in my shop, the succulent in the photos are not included and are only there to help showcase the potential of the pots.   Succulents are available at your local nursery and can be easily added to the pot. The pots are not intended for children.







Also handmade coasters, a classy way to protect your furniture from your favorite drink, the back is cork to further protect your furniture.








Monday, April 17, 2017

Beautiful Bohemian Necklace

Marlee Loves Roxy made a striking necklace with tiny Czech beads and one of my cross pendant beads.  It is a lovely design that would compliment many outfits.  Please shop her store for beautiful romantic Boho pieces.  Enjoy!






Tuesday, June 30, 2015

It's summer...pull out the canning jars.

I was raised in the country and we canned everything we couldn't eat fast enough.  There is even a family story of a near feud between two of my great aunts due to canning jars not being returned.  When I was a kid the jars often contained SWEET jam or SWEET pickles.  If the jars were empty we drank SWEET tea or SWEET lemonade out of the jars. In the spirit of summer time canning I have made these SWEET pottery cuff beads and I have included a quick tutorial on how to make a cuff bracelet faster than you can peel a bowl of peaches. 


In a mix of blues, browns and greens
In Indian Summer
 Super simple, just take a leather cuff and punch one hole to match up with each of the holes on the bead and then punch an additional hole approx. 1/4 inch from the outside of the first two holes.  I just hold the bead in the center of the leather and I use an ice pick to make a small prick in the leather where the hole will need to go.

 Then I begin sewing the bead to the leather, I use waxed linen thread from the box chain craft stores (look where they sell leather).  After stitching thru the bead and leather a few times I tie it off in the back.

 Here are a few good shots of the knot in the back.  I find that the wax string stays tight and does not come undone.

Repeat with the other side and cut off the ends when you are done.  And faster than you can peel a bowl of peaches you have a SWEET cuff bracelet.  Enjoy!
 
I also wanted to share two beautiful designs using my cross beads.  The first is a Elli cuff bead made into a great bracelet by Southern Grace Jewelry and a beautiful necklace with one of my worldly mix cross pendants by Topa Topa Designs.  Enjoy!



Saturday, May 25, 2013

Leather and Pottery Cuff Tutorial

I recently explored the possibility of making my own leather cuffs as I wasn't able to find what I wanted.  I found that both my local craft stores (Michael's and Hobby Lobby) sold leather strips (in the leather section of the store) that are approx. 4x9 inches.  I also found that in the sewing department I could purchase metal buttons that are designed for jeans.  The process was really easy, just cut the leather to the width you need and the length plus one inch to the length.  
Leather Punch

I have a leather punch that I used to punch a small hole in about 1/2 inch from one side and centered.
Metal button back

This shows the nail head of the metal button

Put the nail head of the metal button into the hole and then flip over the leather and line up the decorative metal button top, carefully flip over again and put the button back on a hard surface.  
 
This is the top of the decorative jean button

 With one good whack of the hammer it will be attached firmly to the leather.  On the other side of the leather I made two small holes parallel of each other and cut the center to form the button hole for the cuff.
Give the back of the button a whack or two with your hammer

The button is now attached

This is what it looks like buttoned
 Now embellish the cuff with old findings and a pottery bead. Determine the mid point of the leather, and align a pottery bead on a metal finding.  It helps if the metal is curved, just take a can of veggies out of the pantry and use it to curve the metal.  Line up the bead with the metal finding and mark on the metal finding where the holes are in the pottery bead.  Punch a hole thru the metal where you made your marks.  I use my euro punch to punch the metal but you could use a drill also.
My Euro Punch

Now line up to the mid section of your leather cuff and mark where the holes will hit the cuff.  Make a tiny hole with a leather punch, and then add a micro screw thru the pottery bead, finding and leather secure on the back with a micro nut.  You could add E-6000 to the back of the metal finding before attaching the screws for a more secure fit.  

This cuff was made with one of my Edith beads


I love the patina on the metal

This image shows the micro screws on the inside of the cuff.  The back of the micro screw can be sanded with a file if it is too long.


This image shows all the details of the cuff assembly

Another version using black leather and one of my pottery rose beads


These are so easy to make and the varieties could be endless using old findings and pottery beads.  I hope you enjoyed the tutorial.  Happy day! Cindy

Saturday, March 31, 2012

Pottery and Mixed Media Beads

I have really had fun lately adding metal accents to my pottery beads using tiny micro screws and nuts.  It has really been a fun addition to my designs. I like cobalt blue and silver so made these cuff beads with a abstract design. 


Pottery and Metal Beads

Look at the tiny nuts on the back of this bead.
 Using one of my cuff beads and a little bit of chain I actually made a cuff bracelet for myself.  It is a simple design but it looks great with my favorite denim skirt. The chain is recycled from a necklace I picked up at Kohl's for 70% off.  It had a lot of mixed matched chains perfect for taking apart and re-purposing into a fun new design. 

 I also made some mixed media pottery beads in faux leather finish and fireluster. I found some really cool brass beads to add to these with my micro screw and nuts.